Agitation tank is the necessary equipment to extend the medicament reaction time and strengthen the drug reaction quality. It is mainly used to mix pulp before flotation in beneficiation processing and make potions and pulp fully mixed. Also it can be used for roiling mixing or dilution mixing in chemical industry. It is installed before the flotation machine and makes the reagent and the ore pulp to be fully mixed. This machine is suitable for mixing the ore pulp whose density is lower than 3.5 and the flotation reagents whose density is lower than 30%.
XFD-12 laboratory flotation machine applicable to used in flotation of Gold, Silver, Copper, Lead, Zinc, Lithium, Nickel; And graphite, sulfur, diamond, quartz, mica, feldspar and other non-metallic minerals and silicate minerals and fluorite, apatite, barite and other non-metallic salt minerals and potassium salt, rock salt and other soluble salt minerals,It also can be used in float test on 125-3000g flotation sample.
The liner plate of wet ball mill mainly plays two roles: one is to protect the cylinder of the ball mill and eliminate the direct friction and impact of materials and steel balls on the cylinder; Second, different types of ball mill liners can be used to adjust the movement state of the ball mill steel balls, enhance the crushing effect of the steel balls on materials, improve grinding efficiency, increase output and reduce metal consumption.
We produce full sets mining equipments for processing and separating gold, copper, tin, iron, zircon, rutile, monazite, tungsten, cassiterite, chrome, coltan, manganese, ilmenite, tantalum, niobium, barite and so on.
The magnetic separator machine is a very important part of the mineral processing process. The reasonable, advanced, and efficient magnetic selection equipment determines the advantages and disadvantages of the mining process process.
Centrifugal concentrator has become one of the main equipment for tungsten tin slime gravity separation in China at present, and is also suitable for iron ore beneficiation in recent years.However, what are the key points of centrifugal concentrator operation?
Ball mill is a kind of grinding machine used to grind the crushed materials into extremely fine power, this series ball mill is mainly applied for industrial and mining enterprise such as Mining Ore Gold Copper Lead Manganese Iron Slag Sliver Aluminum Limestone Gypsum Powder ,metallurgy, building materials, chemical and other grindable materials, it can be used for wet and dry milling
The rod mill uses steel bars as the grinding medium, and the materials are in point contact during the grinding process. Therefore, compared with the energy-saving ball mill, the rod mill has the characteristics of uniform ore discharge, which is suitable for production lines that require more uniform particle size, such as the rod mill grinding quartz sand, sand making and other production lines.
The impact crusher is one of our common crushing equipment, which is widely used in chemical industry, railway, highway, construction, cement and other industries. The size of its work efficiency will have a very important impact on the construction progress of the enterprise. Many customers want to know how to improve the efficiency of counterattack. Today, we will analyze the methods to improve the efficiency of the impact crusher.
Cone crushers, also known as conical crushers, break rock between an eccentric rotating head and a bowl. The rotating head is covered by a wear-resistant mantle.The large pieces are broken once between the two jaws, then they gradually descend into the crusher where they continue to be broken until the pieces are small enough to pass through the narrow opening at the bottom of the breaking space. A cone crusher can crush a variety of rocks, from medium to hard. The way a cone crusher operates is similar to how a gyratory crusher does, but in a cone crusher the slope in the breaking space is not as steep.
Gemini Table, also known as a precious metal table, works according to the specific gravity prince. Ideal for grain sizes between 30 micron and 2mm. It is specially designed for precious metals such as Gold, Palladium, tantalum and copper. It can maximize the concentration rate in the ore with its low energy consumption.
Vibrating Screen is used for the crushing of raw materials in metallurgy, architecture, road construction, chemistry, and silicate industry which can Grind the mid-hard ore and rock. This series Vibrating Screen has a feature of large crushing ratio, uniform product granularity, simple construction, reliable operation, easy maintenance, low operating cost.